VALUH2O 400GPD Reverse Osmosis Filtration System With Booster Pump

5-stage filtration system
Spun sediment pre-filter
Granular activated carbon (GAC) filter
Carbon block (CTO) filter
3013 reverse osmosis membrane, rated 400 GPD
Taste and odour post-filter
Booster pump for consistent pressure
Direct-flow (tankless) design

Stage 1 — Spun sediment filter: removes dirt, rust, and suspended particles

Stage 2 — Granular activated carbon: reduces chlorine, chemicals, and odours

Stage 3 — Carbon block: further reduces chlorine and organic chemicals, protecting the membrane

Stage 4 — 3013 RO membrane (400 GPD): reduces dissolved solids, heavy metals, and fine contaminants down to around 0.0001 micron

Stage 5 — Taste and odour filter: final polish before the water reaches the tap

The booster pump pushes water through three pre-filters, which remove sediment and chlorine. The RO membrane then separates dissolved solids and contaminants from the water, sending them to drain. The filtered water passes through a final taste and odour filter and out to the tap. The system runs direct-flow, producing water as it is needed.

1. Install under the sink and connect to the cold water supply, drain, and dedicated faucet.

2. Connect the booster pump to a power source.

3. Flush the system before first use, as directed in the manual.

4. Replace the sediment and carbon pre-filters every 3 to 6 months, depending on water quality and usage.

5. Replace the RO membrane every 24 months, depending on water quality and usage.

Filtration Stages: 5
Membrane: 3013 reverse osmosis element
Production Rate: 400 GPD (gallons per day)
Design: Direct-flow (tankless)
Booster Pump: Included
Water Pressure: Suitable for water supply pressure of 3 to 5.5 bar
Micron Rating: RO membrane filters down to approximately 0.0001 micron
Best For: Standard municipal water, everyday household use

Warranty & Returns

1 x VALUH2O 400GPD reverse osmosis system with booster pump