VALUH2O RO Replacement Filter Set (incl 75GPD SUPERPURE Membrane)
VALUH2O RO Replacement Filter Set (incl 75GPD SUPERPURE Membrane)
Couldn't load pickup availability
Keep your VALUH2O 75GPD Reverse Osmosis System performing at its best with this complete replacement filter set. Includes all five filtration stages — sediment, GAC, carbon block, RO membrane, and inline carbon polish — so your family always has access to clean, safe, and great-tasting water.
Replacing your filters on schedule is the single most important thing you can do to maintain RO performance. This set makes it simple: everything you need in one purchase, designed specifically for the VALUH2O 75GPD No-Booster-Pump RO System.
Key Benefits:
- Complete 5-stage replacement set — everything included, nothing extra to source
- Maintains up to 99% contaminant removal including heavy metals, bacteria, and dissolved solids
- Restores full system flow rate and purification performance
- RO membrane rated for up to 18–24 months of use
- Pre-filters recommended for replacement every 6–12 months
- Compatible with VALUH2O 75GPD Reverse Osmosis Filtration System (No Booster Pump)
Replace your filters on schedule and your RO system will continue delivering consistently pure, fresh drinking water — day after day, year after year.
Product features
Product features
Complete 5-Stage Filter Replacement Set
Includes 75GPD RO Membrane
Restores Full Contaminant Removal Performance
Pre-Filters Replace Every 6–12 Months
Membrane Replaces Every 18–24 Months
Compatible with VALUH2O 75GPD No-Booster-Pump RO System
Filtration Details
Filtration Details
Stage 1 – Sediment Filter: Removes dirt, rust, sand, and visible particles to protect downstream filters and the RO membrane.
Stage 2 – GAC Filter: Reduces chlorine, odours, and organic contaminants that would otherwise degrade the membrane.
Stage 3 – Carbon Block Filter: Removes VOCs and further improves taste and water quality ahead of the membrane.
Stage 4 – 75GPD RO Membrane: Removes dissolved salts, heavy metals, bacteria, and microscopic impurities (approximate waste ratio 1:3).
Stage 5 – Inline Carbon Post-Filter: Polishes the purified water for improved taste and freshness before it reaches your glass.
How it Works
How it Works
Water passes through three pre-filtration stages to remove sediment, chlorine, and chemicals before reaching the RO membrane. The membrane removes dissolved solids and microscopic contaminants. The final inline carbon post-filter enhances taste, delivering clean, fresh drinking water on demand.
Installation and Maintanence
Installation and Maintanence
1. Switch off the water supply to your RO system before beginning.
2. Release pressure from the system by opening the RO tap and allowing it to run dry.
3. Replace pre-filters (Stages 1–3) by unscrewing the filter housings, removing old cartridges, rinsing housings, and fitting new cartridges.
4. Replace the RO membrane by removing the membrane housing cap, pulling out the old membrane, and inserting the new one.
5. Replace the inline post-filter (Stage 5) by disconnecting the quick-connect fittings and fitting the new filter.
6. Restore water supply, check for leaks, and allow the system to flush for 10–15 minutes before use.
7. Replace pre-filters every 6–12 months and the RO membrane every 18–24 months for optimal performance.
Technical Specifications
Technical Specifications
Filter Stages: 5 (Sediment, GAC, Carbon Block, RO Membrane, Inline Carbon)
Membrane Capacity: 75GPD (284L/day)
Filter Size: 10×2.5-inch Slimline (Stages 1–3)
Membrane Replacement: Every 18–24 months
Pre-Filter Replacement: Every 6–12 months
Compatibility: VALUH2O 75GPD No-Booster-Pump RO System
Warranty Information
Warranty Information
What's in the box
What's in the box
1 × Melt-Blown Polypropylene Sediment Filter (10×2.5-inch)
1 × Granular Activated Carbon (GAC) Filter (10×2.5-inch)
1 × Carbon Block Filter (10×2.5-inch)
1 × 75GPD RO Membrane
1 × Inline Carbon Post-Filter
Share
